Remotec Z-Wave Thermostat
The Remotec Z-Wave thermostat ZTS-500 is an intelligent, programmable thermostat controller with a blue display which is easy to read even in dimly lit areas.
This thermostat delivers permanent day and time settings that are even maintained during power outages. It offers the option to remotely control / check your room temperature via a smart phone or PC which is associated with your Z-Wave home controller.
For added convenience, the thermostat unit can be run using battery power or using power from your heating/cooling system, giving you the option of permanently eliminating battery changes.
This thermostat is compatible with a broad range of 24-volt heating and cooling systems, including both single-stage (cooling) and single and two-stage heating systems (non-heat pump), single-stage heat pumps, and heating-only or cooling-only systems.
- Supports 2 stage heat, 2 stage cool, 2 stage fan
- 24Vac single & two stage conventional heating systems (gas/oil/electric)
- Heat pump systems with up to two stages of heating (electric/gas)
- Zoned forced air and zoned hot water (2 or 3 wire)
- Millivolt systems (12-24Vac or DC source)
- Can be controlled by android smartphones and iPhones (via home controller)
- One or two stage cooling systems
- Hybrid systems
- Z-Wave Dual mode (FLiRS, Always Listening)
Technical Specs
|
RF Protocol
|
Z‐Wave
|
|
RF Frequency
|
921.42Mhz ‐ AU/NZ approved RF for Z‐wave
|
|
Z‐Wave device type
|
Z-Wave Plus Thermostat, Routing slave
|
|
Relay Contact
|
Voltage 24 VAC 50/60 Hz
Current: 1A Max (inductive)
|
|
Operating Voltage
|
DC 6V, 4 x AA batteries
OR 24 VAC ± 20% 50/60Hz
|
|
Operation Range
|
Up to 30m indoors with no obstacles
|
|
Temperature Measurable Range
|
32 ~ 99 °F / 0 ~ 40 °C
|
|
Application
|
Indoor use only
|
|
Operating Temperature
|
0 ~ 50 °C
|
|
Storage temperature
|
‐5 ~ 60 °C
|
|
Weight
|
190g
|
|
Housing
|
ABS
|
|
Compliance
|
CE, RCM
|
|
Regulatory Compliance Mark
|
N5496
|
|
Dimensions
|
(LxWxH) 160mm x 100mm x 27.5mm |
